Washing Meth With Acetone

Pill2Chill

Introduction

sekio edit: Without lab testing, you as a layman can only guess at purity and composition of substances. Reagent color change tests can help to identify pure substances, but are unhelpful at identifying mixtures. Judging purity by weighing what you get out of a wash doesn’t work, either – there’s no guarantee that the residue is amphetamine. Bioassay (“tasting it”) isn’t of any use because of the number of drugs that can look and act similarly to amphetamines. Acetone and other solvent washes are meant to remove certain cuts you know have been added, not to purify or isolate amphetamine out of a mystery mix. (For purification of amphetamine out of mystery mixtures, acid/base extraction is the gold standard.) You can send drugs – pills, powders, or pastes to DanceSafe (http://www.pillreports.com/) or Energy Control (http://energycontrol.org/) if you want professional GCMS testing. It’s anonymous and worth the money.

Acetone and other solvents are flammable and should never be used around sparks or open flames (refrigerators, freezers, electric motors, furnaces). The vapours are volatile and can flash back to the container and cause a boiling liquid expanding vapour explosion. Always work with acetone in a well ventilated area, have something to clean up spills like vermiculite or cat litter (or paper towels or sawdust or something else absorbent) and wet it with cold water. Remember acetone will eat many plastics, paints, and varnishes.

Hey, I figured I would write down this simple guide to acetone washing as there doesn’t seem to be too much information about it on the forums and it definitely has an added HR value. This method works for cocaine hcl, amphetamine sulphate and methamphetamine.

Deze video is gemaakt in het kader 'schadebeperking'. Wij promoten het gebruik van drugs niet en er kunnen geen rechten ontleend worden aan de informatie in.

Acetone is a component of paint thinner (and nail polish remover) and can be bought from hardware stores or art supply stores. Alcohol can be obtained from hardware stores or liquor stores. Acetone is used as the 'mother' liquid, amphetamine is insoluble in acetone but most of the crap used to cut it is. Pour acetone into the container so that the speed is completely submerged in it with a centimetre or 2 of excess liquid and swish it around to dissolve any soluble impurities. Next gently heat the acetone until it boils, and then take it off the heat.

Washing Meth With Acetone

First let’s get this common misconception out of the way. Amphetamine paste = Amphetamine sulphate =/= Amphetamine base. Another common slang is ‘eurospeed’. The base is an oily liquid that evaporates at room temp and is therefore extremely rare. Most people won’t ever come accross real amphetamine base unless they turn the sulphate into base themselves. Sulphate, or the common amphetamine ‘paste’ is not smokable (which real amphetamine base is). The paste is wet simply because it has remainders of solvents used in production, or added by dealers to add weight. Usually acetone and/or methanol, so it’s wise to let your amps dry before using them, even if you’re not cleaning your amphetamines, as both of those are very detrimental to the body. You can easily dry amphetamine sulphate ‘paste’ by smearing out the wanted amount on a DVD case (or whatever you have available), waiting 5 minutes and then scraping it together, or if you’re more patient just leave the open baggy on the heater and all the solvents will evaporate until you’re left with dry amphetamine sulphate.

Amphetamine sulphate, as well as cocaine are often cut with caffeine and other nasty active ingredients. When you’re 100% certain of your source (doubtful in most cases) or can have it tested in a lab (I’m thinking Netherlands, Belgium) you will have no use for this method, but if you’re buying and using it and do not have that certainty: there’s this easy way to clean your amphetamines and remove most of those active cuts. (A good indication for caffeine in amphetamines/cocaine is that it won’t chop to powder easily; but rather clump together and be a little sticky. What you’re left with after an acetone wash will be a product that powders very easily and is notably more pure.) It’s very simple; basically the nasty active cuts are soluble in acetone whereas amphetamines, cocaine and meth are not. A LOT of the cuts will be taken out by this method; but if it’s cut with anything that is insoluble in acetone, that cut will of course be left behind.

Requirements

Amphetamine sulphate (duh)
this is what it looks like, straight from my dealer, uncleaned and in its ‘paste’ form. (aka, a little wet with nasty solvents…)
http://puu.sh/9fgpA/1a29512a57.jpghttp://puu.sh/9fhag/e499a5567f.jpg
Pure acetone.
Why pure? If it’s not pure, it’s likely to contain other solvents that will dissolve amphetamines, thus making a wash impossible. It’s not hard to find; I get mine at the hardware store across the street
http://puu.sh/9fhyW/b8e4ba8830.jpg
a dish This can be a simple plate with some depth, as can be seen in the second pic of the first item on the list, but there are probably better alternatives. Use your imagination.)
A syringe and a Q-tip.10ml is best, or even bigger is better if you’re using a needle. On the pic below it’s a 5ml I believe.
(Needle optional, but it does facilitate the process. The gauge used in the pic is about right, smaller is fine too but if it’s too thin it’ll take more time.)
http://puu.sh/9fzOo/b55a6ed122.jpg
Alternatively you could use a coffeefilter, I advise against this as more amphetamines gets left behind in the filter this way.

Procedure

Cut open the baggy, remove the amphetamines, place on tray/plate.http://puu.sh/9fhag/e499a5567f.jpg
Pour acetone over the amphetamines until it is well covered with acetone. If you need a ml amount; 10-15ml per gram is plenty. You can use as much as is convenient, just try to make it so you’re not wasting too much acetone. Make sure the edge of your tray/dish is high enough so you can still stir it without spilling anything.
Stir, make sure all the amphetamines are spread out and that there’s no “lumps” left. The solution in your plate will be cloudy.
Give it a minute to settle.
Now take your syringe, and using the qtip as a filter, draw up the acetone with your syringe. Depending on the size of your syringe this can take a few times but shouldn’t be too hard.I didn’t use a needle in this wash. The settled amphetamines can be clumpy like in the picture as long as it was properly stirred.
http://puu.sh/9qfe4/5f0530c806.jpg
When you’ve drawn up all of the acetone that you used in the plate, and squirted it all in a container you’ll be left with a pretty wet white paste, scrape this together.http://puu.sh/9qfzL/9c707c002d.jpg
Wait about 10-15mins for it to dry. Acetone is very volatile so it wil dissipate in no time. The amphetamines you’ll be left with will be much, much purer, and cleaner in effects. They will also be more ‘rocky’ instead of sticky (if there was caffeine in them), and will chop up to powder a lot faster and easier.10 minutes after scraping the amphetamines together, this was the result:
http://puu.sh/9qfGE/46415ef96d.jpg

See any mistakes? Feel free to respond if something is unclear or if you see anything wrong with this post.
——
clubcard

Neat – has any one dared to freebase & smoke (the liquid) I think dissolving freebase if caffeine or such might be the stuff called ‘base’.

klekip

Does anyone know the safety of putting acetone through standard plastic syringes? It seams like it would leach some chemicals from the plastic?
Just a thought

sekio

Food grade PETE, HDPE, LDPE, FET/PTFE/Teflon, or polypropylene, like many oral syringes are made of, should be OK and have no extractables. Metals are OK but acetone will remove any grease, oil or pant on them. Most chemical bottles are glass, HDPE, or FET/PTFE and should be fine, although cap liners are sometimes polystyrene.

Natural rubber, polycarbonate, acrylic, or polystyrene will all dissolve in acetone. Vinyl (like electrical tape) or the adhesive on labels will dissolve too.

Look up a material compatibility chart on google for more.

tricomb

I just glanced over this and will check it out in detail later, but PLEASE put it in large red bold letters about the safety measures and precautionary protective gear that one must use and be aware of when handling, transporting, using, storing, opening, etc, such a volatile Ketone.

I only mess with anhydrous acetone and seriously, people cannot disregard how explosive and volatile it is.

I would add links to the MSDS of every chemical that in and of itself is an HR risk if not properly respected and researched prior to going out and buying and using relevant compounds. I’d do it myself but I gotta run right now, but otherwise looks good, good job P2C 🙂

Lots of chemicals say that they are flammable or to not use around open flame etc, but a lot of the time it’s written for legal liability issues for the MFC, and I assure anyone reading this, that you need to be SERIOUSLY thinking about static discharge, pilot lights, ANYTHING that could cause the more-than-5-times-as-explosive-as-gasoline compound that is Acetone. Respect the solvent and you should be okay, but of all the things to be safer vs sorry, this is not one of the one’s anyone should think “meh, it’ll be fine, it’s not stuffy in here so I don’t need to worry about the ventillation of this enclosed area.” Disregarding the safety precautions associated with anhydrous compounds like acetone is SUICIDAL and like I said, just to be safe, treating it like it’s Plutonium is a good idea even though it’s an exaggeration, I’m factoring in here that both methamphetamine and cocaine tend to make people delusional in a minor to severe way that even minor feelings of “yeah thats not gunna happen to me, I’ll just be careful, but wear a respirator? I don’t have asthma it’ll be fine.” etc.

Stimulants make you feel more invincible than you are, and since it’s stimulant users who will be using this, it’s important to me to be so explicitly clear that under the influence, you are not a good judge of your own character, so you may unknowingly decide not to do something meant to reduce the risk of making lethal mistakes that a sober and sane person wouldn’t make.

sekio

Acetone is flammable, but not ultra explosive-flammable, like things like ether, propane, acetylene, hydrogen, MAPP or butane – gases or liquids with very high vapour pressure. The boranes, carbon disulfide and diazomethane are probably the kings of bad news but they are only ever used in specific industrial processes.

Just keep it away from open flames, and sources of ignition, and you’ll be fine.

Acetone is also pretty much nontoxic. Your body makes it from fat molecules when they are metabolized. Just keep it out of any warm wet places like eyes and don’t intentionally consume any more than about 5ml in a day. (Some people use it as a solvent for things like salvia tinctures because it dissolves salvinorin better than alcohol) Work with it in a well ventilated area or outside, the vapour can irritate your lungs in large amounts.

llamer

this is a good method because it doesn’t require filtration. i don’t recommend percolating washes because there is a tendency to acquire fibers from the filter you are using that get into the product you want clean.

hardware store acetone is not going to be anhydrous and probably nowhere near dry enough to do this without wasting some product. you can dry your acetone with stuff like anhydrous epsom salt and other dessicates, although they might deposit in the material you are trying to purify. if your amphetamine still looks or feels wet when there is no more acetone smell, or if you see liquid left in your glass jar where you dumped the acetone but there’s no smell coming off it then your acetone has water in it. save that jar for when you run out of speed and don’t mind smoking your acetone wash for whatever the water took out of your stash during rinsing.

i wouldn’t worry about fire during any of this unless you can’t go five minutes without lighting up a cigarette. i’ve done this like fifty times in spaces lacking even an open window and i never had anything to worry about. it’s no more dangerous than building a model airplane.

Gizzlefrtiz

So ….

Gizzlefrtiz

So…. I have
Mouse over image to zoom

http://i.ebayimg.com/00/s/MTUyOVg4OTM=/z/YFoAAOxyOlhS9jZR/$_14.JPG

Acetone 16 oz (~500 mL) 99.9+% pure
could I do it in beakers and filter with Filter Paper Qualitative Medium 18cm (http://www.amazon.com/gp/product/B0019ZGTSC/ref=oh_details_o05_s01_i01?ie=UTF8&psc=1)????

monstersink81

If after acetone is used as stated, the outcome is a tanish orange substance with small orange crystals? What are the possibilities this is?

redbull1969

Hi sekio,
How about ammonia, I know people use it with coke , to be able to smoke it. If the speed is cleaned, can you smoke it then too?

Acetone And Meth

redbull1969

Hi sekio,
How about ammonia, I know people use it with coke , to be able to smoke it. If the speed is cleaned, can you smoke it then too?

Jamyj49

Sounds valid. I’m getting ready to try

sekio

If you mix your amphetamine with ammonia you’ll freebase it and get an oily, shit-smelling, corrosive liquid.

The free base of amphetamine is not a drug of commerce. People smoking speed usually do it with the HCl salt.

If after acetone is used as stated, the outcome is a tanish orange substance with small orange crystals? What are the possibilities this is?

We don’t allow substance ID. It could be damn near anything.

alute

What if you use denature alcohol or vodka?

KINGCRIMSON

would this work on 3,4-CTMP HCI, dichlorolmethyphenidate ? for injection ?

creamynebula

About the discussion about the materials, the materials the syringe are made are actually irrelevant no? I mean, isn’t the acetone you are taking with the syringe going to be discarded, and the product eventually consumed the undissolved amphetamine left in the plate?
Or am I misunderstanding and the amphetamine is actually going to dissolve in acetone and be extracted this way so its not a wash?

trunkofmycar

Very helpful information!! Thanks. (:

Pill2Chill

About the discussion about the materials, the materials the syringe are made are actually irrelevant no? I mean, isn’t the acetone you are taking with the syringe going to be discarded, and the product eventually consumed the undissolved amphetamine left in the plate?
Or am I misunderstanding and the amphetamine is actually going to dissolve in acetone and be extracted this way so its not a wash?
Precisely. 🙂

hadora

personnaly i would rather use distillation rather than a simple acetone wash, it’s no more complicated and the product will be probably more than 90+% pure

Rossak

cool read.. 😀

Washing Methamphetamine With Acetone

Sprout

Washing Meth With Acetone

Glad someone bumped this – brilliant thread.

P2C would you mind if I used this over in EADD?
It’s 10x better than I could come up with so… 🙂

beels

Meth

Would this method remove glucose powder from base amphetamine?

darrelltj78

I assume when you say “pure”acetone that means not from the hardware store, how can you tell the difference?

Purifying Meth With Acetone

mackmaine

would something like this work
http://www.walmart.com/ip/ONYX-Professionals-100-Pure-Acetone-Nail-Polish-Remover-16-fl-oz/11047134
it says 100% pure, yet the second ingredient is denatonium benzoate. would this end up messing up the gear? or i can use it same as described in the above steps

Acetone To Clean Meth

Neithman

would something like this work
http://www.walmart.com/ip/ONYX-Professionals-100-Pure-Acetone-Nail-Polish-Remover-16-fl-oz/11047134
it says 100% pure, yet the second ingredient is denatonium benzoate. would this end up messing up the gear? or i can use it same as described in the above steps
well take a little bit of your gear and try it but i wouldnt be suprised if it doesnt work

mackmaine

Washing Meth With Acetone

figures :/

How Do You Wash Meth

Acetone is a pretty convenient solvent for cleaning random gunk off of meth. It dissolves many different things, especially things that are greasy or smell bad, but it won’t dissolve meth. But everyone always seems to obsess way too much about making sure that the acetone is bone dry first. That’s really not as critical as people make it out to be though, so I figured I’d talk about what’s really important here.First off, there are two grades of acetone that are commercially available: the stuff sold in hardware stores, and the stuff sold in drugstores and beauty salons. Hardware-store shit is not held to very high purity standards at all, and tends to have other chemicals in it, including water. The stuff used for removing nail polish and fake nails is the next grade up though, and as a result, almost always contains less water. If you buy any though, make sure it doesn’t have dye in it and the bottle says “100% acetone” on it. More often than not, there will be some denatonium benzoate in it to make it bitter, but they never use very much. That shit’s expensive. And it doesn’t seem to cause any problems anyway.Now, acetone evaporates really quickly, and that makes it get cold when it’s exposed to air. When something gets cold, water will condense on it from the air, and acetone is no exception. It’s just that when water condenses on acetone, you can’t see it. But the fact that this happens means you have to do an acetone wash pretty quickly to keep water out.If you do acetone washes pretty regularly, you may as well have somewhere to put the used acetone where it can evaporate. Then you can see what’s been dissolving away. It’s usually brown greasy shit, but if you notice crystals in it after some time, it’s possible to reclaim that shit. None of that brown greasy shit should dissolve in water, so use that to selectively dissolve the crystals then pour it off and evaporate.Have fun.
Submitted November 01, 2018 at 07:46AM by HeisenbergSpecial via reddit Stims.