Xcpuscalar 2 85 Seriale

Tested and it works. I used ArduinoISP on my UNO to program the Tiny85 and then a PL2303 usb cable for the serial connection which I connected to with the serial port terminal program GtkTerm on Linux. /. Software serial multple serial test Receives an integer from the software serial, blinks an LED that number of times, and returns a confirmation. The USB – serial communication device can be an Arduino Uno board, a standalone USB – Serial board, or an AVR programmer like the Reactor Core 3-in-1 programmer. Wiring is like you would expect. Power from the Arduino/USB device goes to power on the ‘tiny (pin 1 for ’84, and pin 8 for ’85). 2.5mA max current use during conversion (while requesting data) Good for 0-100% humidity readings with 2-5% accuracy Good for -40 to 80°C temperature readings ±0.5°C accuracy. JDownloader is one of the best download managers that you can get for your PC. JDownloader is already a powerful download manager, however, it allows you to. 2.5mA max current use during conversion (while requesting data) Good for 0-100% humidity readings with 2-5% accuracy; Good for -40 to 80°C temperature readings ±0.5°C accuracy; No more than 0.5 Hz sampling rate (once every 2 seconds) Body size 15.1mm x 25mm x 7.7mm; 4 pins with 0.1' spacing.

Send a pulse to the arduino uno through by a attiny 85, using software serial communication

  • 2,491 views
  • 0 comments
  • 1 respect

Components and supplies

Apps and online services

Arduino IDE

About this project

hello everyone.here I am just make a simple serial communication from attiny85 to the arduino uno.here the tiny85 is act a master role, and the arduino uno is a slave.the data is passed from the 4th(TX) digital pin of tiny85 to 4th(RX) digital pin of arduino uno.im using the pushbutton in tiny85, when im press the push button the pulse send to the arduino uno by using the TX-RX wire then the arduino's led is glowing :).

Xcpuscalar

working video

Code

Schematics

Author

suriya prakash
  • 1 project
  • 2 followers
Xcpuscalar

Published on

July 15, 2020
Write a comment

Members who respect this project

See similar projects
you might like

Table of contents

Write a comment

New version 2.3, now with Auto Scale, CPU Meter, Health meters & Auto Start on Soft Reset. Also supports 1910's with new PXA255 processors.

Xcpuscalar 2 85 SerialeXcpuscalar 2 85 seriale online

This product was designed for the iPaq 1910 only. XCPUScalar allows you to dynamically scale the processor speed of your handheld Pocket PC 2002. Use Auto Scaling to assign speeds to different CPU loads, It uses the power of the XSCALE processor and unlocks its dynamic scaling capabilities. You can reduce the speed of your handheld or increase its speed automatically depending on CPU usage of your applications. By scaling the processor speed down, you can increase the battery live between recharges or increase the speed when you need more power for playing games or multimedia programs that require more CPU power. The speed can be scaled from 100 to 300MHZ. The Ipaq 1910's default speed is 200MHz.

If you are using a 400MHz XScale Pocket PC, like Ipaq 3955, Ipaq 5455, Toshiba e740, Dell Axim Advanced and Basic, then download XCPUScalar 400. Download XCPUScalar 400 here.

Xcpuscalar 2 85 Seriale Online

WHATS NEW IN VERSION 2.3:
Auto Scale with CPU load:
Power on demand, XCPUScalar will now automatically calculate the CPU load on your Pocket PC and switch speeds automatically depending on whether an application requires less or more power. XCPUScalar will scale the speeds automatically and throttle speeds as applications demand power. XCPUScalar throttles down to idle speed when there is no activity giving you the maximum battery power consumption. You can assign your own speeds to different CPU loads as you desire.
XCPUScalar calculates all factors and normalizations automatically and takes the guess work out of using auto scaling.
CPU Meter and WisBar /Gigabar /ICbar or other TaskBar Manager Integration:
XCPUScalar will now install an animated CPU meter icon on your TaskBar (this is the blue title bar area), you can monitor the CPU load and speed when running any application. Clicking on the CPU Meter will launch XCPUScalar for quick access to all settings. CPU Meter detects other taskbar managers and will install its icon in their taskbar area. The position of CPU Meter can be adjusted to be placed anywhere on the taskbar.
Health Meters:
At a glance look at all the vital signs of your Pocket PC. Meters show you CPU usage, Battery Life, Memory program and storage Meters. See how much memory is being used, or left on the fly.

Reduce Screen Flicker Option:
This option was added in XCPUScalar 400 only, to support the Ipaq 39xx and 54xx series to virtually eliminate screen flicker during speed changes.

Xcpuscalar 2 85 Seriale Shqip

Xcpuscalar 2 85 seriale na

Xcpuscalar 2 85 Seriale Na

Minimize On Start:
XCPUScalar can be minimized to start automatically when a soft reset occurs and the system starts up.
Support from 100 to 500MHz:
XCPUScalar 400 now has support for all popular frequencies from 100 to 500MHz. The Ipaq 1910 version can be scaled from 100 to 300 and has a optimized 300MHz speed that reaches benchmark speeds of other 400MHz Xscale's.
Today Screen system tray support:
XCPUScalar can be run from the system tray of the Today Screen allowing easy access to all configurable settings. The system tray icon animates when you change CPU speed, showing you currently running speed at a glance. The tray icon is user selectable and can be turned off.
Sticky Settings:
XCPUScalar automatically detects the speed of your handheld and will automatically force the CPU speed to the user selected speed if it detects that its different. Most 400MHz XScale Pocket PC's automatically reset their speed to the manufacturer's default speed of 400MHz when you Power Off the unit, or when the unit goes into idle mode, causing battery drain. XCPUScalar automatically detects these changes and will revert back to the user selected speed. This setting is user selectable and can be turned off.
Hardware KeyLock:
XCPUScalar can now lock your hardware keys so they do not accidently start other programs when the handheld is in the ON or OFF position.
Display Toggle:
This feature is a display toggle, you can now listem to MP3's while the screen is turned off, saving battery life. by default the Today/Home button is mapped as the display toggle button to turn the screen ON/OFF. Use it in combination with KeyLock to lock all keys but the display toggle key.
Power Off and Soft Reset:
With one click you can now power off or soft reset your Pocket PC without pressing any hardware buttons.
Launch from Anywhere:
XCPUScalar can be configured to execute from the control panel, via a shortcut, from the TaskBar area or from the system tray of the Today Screen. This gives you maximum flexiblity in launching XCPUScalar.
Stealth Mode:
When XCPUScalar is minimized to the system tray, it will automatically remove itself from running processes list.